Personen

Prof. Dr.-Ing. Tobias Laumer

Professor für KI-basierte Produktentwicklung in der additiven Fertigung

Kurzzeichen: Lat

Lehre


Lehrgebiete

  • Fertigungstechnik Kunststoffe (Additive Fertigung, Fügetechnologien, Umformtechnik)
  • Werkstofftechnik Kunststoffe
  • Produktentwicklung

Vorlesungen auf ELO

Kursbereich: Laumer, Tobias


Abschlussarbeiten

Themen für Bachelorarbeiten/Masterarbeiten

Forschung


LaboRe

Labor AIMS

Das Labor AIMS erforscht den gesamten Lebenszyklus von Produkten, beginnend mit der Entwicklung über die Fertigung bis hin zum Recycling, gemäß den Zielen für nachhaltige Entwicklung der Agenda 2030.

Der Fokus liegt dabei auf:

  • Weiterentwicklung von Fertigungstechnologien mit Schwerpunkt auf additiven Verfahren
  • Einsatz von Methoden der künstlichen Intelligenz für ressourceneffiziente Produktentwicklung und intelligente Fertigungsprozessregelung 
  • Erforschung des Potentials und der Einsatzgrenzen von recycelten Werkstoffen

Labor Kunststofftechnik

Werdegang


Studium

  • Studienort:   Friedrich-Alexander-Universität Erlangen
  • Studiengang:   Wirtschaftsingenieurwesen (Diplom)
  • Abschluss:   2011

Promotion

  • Jahr:   2017
  • Thema:   Erzeugung von thermoplastischen Werkstoffverbunden mittels simultanem, intensitätsselektivem Laserstrahlschmelzen

Berufliche Erfahrungen

  • 2011 - 2016:   Bayerisches Laserzentrum, Erlangen; Wissenschaftlicher Mitarbeiter im Bereich Lasermaterialbearbeitung (Additive Fertigung, Laserstrahlschweißen, Laserstrahlschneiden, Laserstrahlstrukturieren)
  • 2017 - 2018:   Bayerisches Laserzentrum, Erlangen; Gruppenleiter Prozesstechnik Kunststoffe
  • 2018 - 2021:   Continental/Vitesco Technologies, Regensburg; Senior Process Engineer im Bereich Kunststofffügetechnologie (zuletzt zentraler Technologieverantwortlicher für gesamte Kunststofffügetechnologie bei Vitesco Technologies)
  • Seit 2021:   Professor an der OTH Regensburg
    • Wissenschaftliche Leitung Technologie Campus Parsberg-Lupburg
    • Leitung Labor Additive and Intelligent Manufacturing for Sustainability

Mitgliedschaften

  • Seit 2022:   Mitglied im RCAI

Publikationen

2024

  • Raths, M.; Bauer, L.; Kuettner, A.; Fischer, S.; Laumer, T.: Gradual error detection technique for non-destructive assessment of density and tensile strength in fused filament fabrication processes. In: The International Journal of Advanced Manufacturing Technology,  2024.

2023

  • Kuettner, A.; Raths, M.; Fischer, S.; Laumer, T.: Heat staking of polymer parts generated by fused layer modeling. In: The International Journal of Advanced Manufacturing Technology, 2023.
  • Kuettner, A.; Behammer, L.; Raths, M.; Fischer, S.; Laumer, T.: Characterization of the properties of heat-staked FLM-printed components. In: Proceedings of FEMS EUROMAT23 - Materials Science and Technology in Europe, Frankfurt, 2023.
  • Raths, M.; Bauer, L.; Kuettner, A.; Fischer, S.; Laumer, T.: An artificial intelligence approach for dynamic flow compensation in fused layer modelling for the enhancement of mechanical properties. In: Proceedings of FEMS EUROMAT23 - Materials Science and Technology in Europe, Frankfurt, 2023.

2018

  • Heinl, M.; Laumer, T., Bayer, F.; Hausotte, T.: Temperature-dependent optical material properties of polymer powders regarding in-situ measurement techniques in additive manufacturing. In: Polymer Testing, Vol. 71, Seiten 378-383, 2018.
  • Stichel, T.; Laumer, T.; Raths, M., Roth, S.: Multi-Material Deposition of Polymer Powders with Vibrating Nozzles for a New Approach of Laser Sintering. In: Journal of Laser Micro/Nanoengineering, Vol. 13, No. 2, 2018.
  • Stichel, T.; Geißler, B.; Jander, J.; Laumer, T.; Frick, T.; Roth, S.: Electrophotographic multi-material powder deposition for additive manufacturing. In: Journal of Laser Applications, Vol. 30, No. 2., 2018.
  • Geißler, B.; Laumer, T.; Wübbeke, A.; Lakemeyer, P.; Frick, T.; Schöppner, V.; Schmidt, M.: Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths. In: Journal of Laser Applications, Vol. 30, No. 3, 2018.
  • Osmanlic, F.; Wudy, K.; Laumer, T.; Schmidt, M.; Drummer, D.; Körner, C.: Modeling of Laser Beam Absorption in a Polymer Powder Bed. In: Polymers, Vol. 10, No. 7, 2018.
  • Geißler, B.; Laumer, T.; Wübbeke, A.; Frick, T.; Schöppner, V.; Schmidt, M.: Analysis of the Weld Seam Morphology of Polypropylene in Laser Transmission Welding. In: Journal of Manufacturing Science and Engineering, Vol. 140, No. 11, 2018.
  • Stichel, T.; Laumer, T.; Schmidt, M.: Simulation des (quasi-)simultanen Laserstrahlschmelzens zur Herstellung von Multi-Material-Bauteilen aus Polymeren. In: Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing, Carl Hanser Verlag, 2018
  • Hupfeld, T.; Laumer, T.; Stichel, T.; Schuffenhauer, T.; Heberle, J.; Schmidt, M.; Barcikowski, S.; Gökce, B.: A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering. In: Procedia CIRP, Vol. 74, Seiten 244-248, 2018.
  • Kühn, C.; Mehl, O.; Laumer, T.; Witt, G.: Comparison between the optical properties of injection molded and additive manufactured components. In: Procedia CIRP, Vol. 74, Seiten 259-263, 2018.

2017

  • Laumer, T.: Erzeugung von thermoplastischen Werkstoffverbunden mittels simultanem, intensitätsselektivem Laserstrahlschmelzen. Doktorarbeit, Meisenbach Verlag, Bamberg, 2017.
  • Stichel, T.; Frick, T.; Laumer, T.; Tenner, F.; Hausotte, T; Merklein, M.; Schmidt, M.: A Round Robin Study for Selective Laser Sintering of Polymers: Back tracing of the Pore Morphology to the Process Parameters. In: Journal of Materials Processing Technology, No. 252, 2017.
  • Amend, P.; Wolf, M.; Mrotzek T.; Laumer, T.; Roth, S.; Gude, M.; Schmidt, M.: Experimental Investigations on Laser-based Hot-melt Bonding and Injection Molding for Laser-structured Metal Plastic Hybrids. In: Proceedings of Laser in Manufacturing (LIM) Conference, Munich, 2017.
  • Amend, P.; Laumer, T.; Baat, F.; Roth, S.; Schmidt, M.: Investigations on Laser-based Hot-melt Bonding of Additive Manufactured Plastic Parts to Metal Sheets for Strong and Tight Multi-material Joints. In: Proceedings of Laser in Manufacturing (LIM) Conference, Munich, 2017.
  • Schmailzl, A.; Geißler, B.; Maiwald, F.; Laumer, T.; Schmidt, M.; Hierl, S.: Transformation of Weld Seam Geometry in Laser Transmission Welding by Using an Additional Integrated Thulium Fiber Laser. In: Proceedings of Laser in Manufacturing (LIM) Conference, Munich, 2017.
  • Stichel, T.; Frick, T.; Laumer, T.; Schmidt, M.: A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties. In: Optics & Laser Technology, März 2017.

2016

  • Laumer, T.; Stichel, T.; Amend, P.; Roth, S.; Schmidt, M.: Analysis of the Influence of Different Flowability on Part Characteristics Regarding the Simultaneous Laser Beam Melting of Polymers. In: Physics Procedia, Vol. 83, S. 937 – 946, 2016.
  • Laumer, T.; Stichel, T.; Schmidt, M.: Optical analysis of polymer powder materials for selective laser sintering. In: Journal of Polymer Testing, Vol. 56, S. 207 - 213, 2016.
  • Laumer, T.; Stichel, T., El-Khoury, M.; Schmidt. M.: The influence of micro-sized structures on the compound strength of multi-material components built by Simultaneous Laser Beam Melting of Polymers. In: Proceedings of LPM2016 - 17th International Symposium on Laser Precision Microfabrication, Xian, China, 2016.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.; Schmidt, M.: Mass flow characterization of selective deposition of polymer powders with vibrating nozzles for laser beam melting of multi-material components. In: Physics Procedia, Vol. 83, 2016.
  • Launhardt, M.; Wörz, A.; Loderer, A.; Laumer, T.; Drummer, D.; Hausotte, T.; Schmidt, M.: Detecting Surface Roughness on SLS Parts with Various Measuring Techniques. In: Journal of Polymer Testing, Vol. 53, Seiten 217-226, 2016.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.: Multi-material deposition of polymer powders with vibrating nozzles inside laser beam melting machines. In: Proceedings of Information, Communication and Automation Technologies (ICAT), 2016 XXVI International Symposium, in print, Nuremberg, 2016.

2015

  • Laumer, T.; Stichel, T.; Amend, P.; Schmidt, M.: Simultaneous Laser Beam Melting of multi-material polymer parts. In: Journal of Laser Application, Vol. 27, 2015.
  • Laumer, T.; Stichel, T.; Gachot, A.; Amend, P.; Schmidt, M.: Realization of multi-material polymer parts by simultaneous Laser Beam Melting. In: Journal of Laser Micro & Nanoengineering, Vol. 10, 2015.
  • Laumer, T.; Stichel, T.; Schmidt, M.: Influence of temperature gradients on the part properties for the simultaneous laser beam melting of polymers. In: Proceedings of Lasers in Manufacturing Conference, Munich, Germany, 2015.
  • Laumer, T.; Stichel, T., Roth, S.; Schmidt, M.: Strategien zur Erzeugung von dreidimensionalen Multi-Material-Bauteilen.Tagungsband des 4. Industrie-kolloquiums des SFB 814, Nürnberg, Deutschland, 2015.
  • Blümel, C.; Sachs, M.; Laumer, T.; Winzer, B.; Schmidt, J.; Schmidt, M.; Peukert, W.; Wirth, K.-E.: Increasing flowability and bulk density of PE-HD powders by a dry particle coating process and impact on LBM processes. In: Rapid Prototyping Journal, Vol. 21, Issue 6, 2015.
  • Fanselow, S.; Schmidt, J.; Laumer, T.; Schmidt, M.; Wirth, K.-E.; Peukert, W.: Herstellung von Polyolefinstrahlschmelzmaterialien mittels Schmelzeemulgieren zum Einsatz in der additiven Fertigung. In: Tagungsband Rapid.Tech, Erfurt, 2015.
  • Stichel, T.; Laumer, T.; Amend, P.; Schmidt, M.: Selective deposition of polymer powder by vibrating nozzles for laser beam melting. In: Proceedings of Lasers in Manufacturing Conference, Munich, Germany, 2015.

2014

  • Laumer, T.; Stichel, T.; Amend, P.; Schmidt, M.: Simultaneous Laser Beam Melting of multi-material polymer parts. In: Proceedings of International Congress onApplications of Lasers & Electro-Optics (ICALEO), San Diego, USA, 2014.
  • Laumer, T.; Stichel, T.; Bock, T.; Amend, P.; Schmidt, M.: Characterization of temperature-dependent optical material properties of polymer powders. In: Proceedings of the Polymer Processing Society 30th Annual Meeting, Cleveland, USA, 2014. 
  • Laumer, T.; Stichel, T.; Koopmann, J.; Amend, P.; Schmidt, M.: Generation of multi-material parts with alternating material layers by Simultaneous Laser Beam Melting of polymers. In: Proceedings of Information, Communication and Automation Technologies (ICAT), XXV International Symposium, Vienna, Austria, 2014.
  • Laumer, T.; Wudy, K.; Drexler, M.; Amend, P.; Roth, S.; Drummer, D.; Schmidt, M.: Fundamental investigation of laser beam melting of polymers for additive manufacture. In: Journal of Laser Application, Vol 26, Issue 4, 2014.
  • Laumer, T.; Stichel, T.; Amend, P.; Roth, S.; Schmidt, M.: Analysis of Temperature Gradients during Simultaneous Laser Beam Melting of Polymers. In: Physics Procedia, Vol. 56, 2014.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.: Powder Layer preparation using vibration-controlled capillary steel nozzles for Additive Manufacturing. In: Physics Procedia, Vol. 56, 2014.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.: Electrostatic Multi-Material Powder Deposition for Simultaneous Laser Beam Melting. In: Proceedings of Information, Communication and Automation Technologies (ICAT), 2014 XXV International Symposium, in print, Vienna, Austria, 2014.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.: Polymer Powder Deposition with Vibrating Capillary Nozzles for Additive Manufacturing. In: Proceedings of Information, Communication and Automation Technologies (ICAT), XXV International Symposium, in print, Vienna, Austria, 2014.
  • Stichel, T.; Laumer, T.; Amend, P.; Roth, S.: Multi-material deposition of polymer powders with vibration-controlled capillary steel nozzles for additive manufacturing. In: Proceedings of the Polymer Processing Society 30th Annual Meeting, Cleveland, USA, 2014.

2013

  • Laumer, T.; Stichel, T.; Sachs, M.; Amend, P.; Schmidt, M.: Qualification and modification of new polymer powders for laser beam melting using Ulbricht spheres. In: High Value Manufacturing, S. 255-260, 2013.
  • Laumer, T.; Stichel, T.; Gachot, A.; Amend, P.; Schmidt, M.: Simultaneous Energy Deposition for Laser Beam Melting of Polymers. In: Proceedings of the Polymer Processing Society 29th Annual Meeting, Nürnberg, 2013. 
  • Laumer, T.; Stichel, T.; Appel, P.; Amend, P.: Untersuchungen zum    Absorptionsverhalten von Pulverschüttungen für das Laserstrahlschmelzen von Kunststoffen.Tagungsband Rapid.Tech, Erfurt, 2013.
  • Laumer, T.; Karg, M.; Schmidt, M.: Neue Prozessstrategien zur Herstellung von Multi-Material-Bauteilen.Tagungsband des 2. Industriekolloquiums des SFB 814, Nürnberg, Deutschland, 2013.
  • Karg, M.; Laumer, T.; Schmidt, M.: Additive Manufacturing of Gradient and Multimaterial Components. In: Proceedings of International Conference on Competitive Manufacturing (COMA), Stellenbosch, Südafrika, 2013.